-
幻灯片一
- 1
- 2
抛丸机外贸要做好必须能够对抛丸机英文表达方式确切让外国客户充分了解抛丸机，抛丸机出口找固德机械，外贸公司有抛丸机订单找我们，我们一直想将我们生产的抛丸机成为广大用户心目中的一个王牌，降低抛丸机故障率，提高抛丸机生产效率，降低抛丸机噪音，提高抛丸机外观从而达到出口抛丸机的要求提高抛丸机用户的体验度。
抛丸机在英文中叫做 Shot blasting machine，履带式抛丸机Crawler type shot blasting machine，吊钩式抛丸机Hook type shot blasting machine，通过式抛丸机Through shot blasting machine，转台式抛丸机Rotary table shot blasting machine等等。
下面先来一段英文的吊钩式抛丸机的工作原理介绍，当然了抛丸机的说法有很多种英文也有不同的单词：
Hanging hook shot blasting cleaning machine is to hang the workpiece on the hook, the hook conveying system will forward the workpiece, hook system with a limit switch, when the workpiece into the cleaning room to reach the limit switch, shot blasting machine began to work sequentially, the working time is 3-15 minutes, after shot blasting treatment, steel surface oxide skin, dirt And other attachments were cleaned up and the treated surfaces were up to Sa2-2.5. The working mode of shot blasting machine is continuous circulation.
The pellets thrown by the shot blasting machine are collected and processed by the circulation treatment system, and continue to be used for shot blasting machines. The working mode of the circulating system is as follows: the scattered bullets are transported to the bucket elevator through the lower screw conveyor, the pills and impurities are lifted to the upper part of the cleaning room by the bucket elevator, and are transported to the high-efficiency BE separator on the upper slope. After being treated by the BE separator, the dust and impurities are separated from the good pills, and the good pills enter the hopper. Storage for ready for shot blasting.
In order to deal with the large amount of dust produced by shot blasting, the machine needs to be equipped with a high-efficiency dust collector. The purified air is much lower than the smoke and dust discharge standards of the same industry.
